Free your inner witch this Halloween and get your potion on!
Small Bottles/ jars
Lids or corks
Labels printed from the internet or you have designed
Long wooden skewers
Cheap clear hair gel
Dash of magic
Handful of curses
Pinch of malice
Sprinkle of spite
In your empty bottle add a squeeze of the hair gel. Some glitter and a drop of food color. I usually try to use glitter and food color that is same color. Using skewer mix the potion.
Add more of gel and glitter. Keep doing this until you have bottled filled to your liking.
If the color isn’t dark enough add more food coloring. Go easy the color can get too dark easily.
Cork that elixir of dread. Add label as is or age it slightly with some watered down brown paint. Top the bottle with some twine and a charm.
Bibbity bobbity boo you have a potion.
Project I am still working on. It’s a practical magic style spellbook. I may have to break down the tutorial into several post. What you think so far?
Triple Moon book of shadows
For this project you will need a hardcover Journal. The paper inside can be lined or blank, the book can be big or small.
A sheet of chipboard. Some thin cardboard would work also.
A pack of gift bag tissue or cheap paper towels.
Some craft glue.
Craft paints. Black and up to three other colors of your choice.
First thing you want to do is get the chipboard and draw three shapes on it the circle and the two half half moons draw two sets of each so you can stack them on top of each other to get you a little thickness. cut them out.
I drew and cut out one set and then traced them to get the second set once you cut those out take two of your half moons and glue them on top of each other so you have a thicker piece do to the same to the other half moon and then your full moon.
Set them to the side to dry.
Now the fun part, on the front of your book take a paintbrush dip it in your mod podge and go all over the front of the book.
If you’re using the tissue paper like you put in gift bags just lay one big piece down press down over the glue and do a little crinkling so you get a good amount of wrinkles.
A little side note if you do want a lot of wrinkles on your cover, before you begin anything on this project take your tissue and ball up into balls. That will help you to get a lot more crinkling.
Now your first layer you should have some overhang on all four sides leave that alone for now now,take your mod podge again and go over the tissue.
Let that dry for a few minutes Open up your book take your modge podge and go around the outer three edges on the inside book cover. If that makes sense.
Take that tissue that’s overhang in the front and press it into the inside go over that with a layer of modge podge.
At this point I found something to stick in the book to prop up the front cover so it can dry.
Now using some glue, glue your triple moon symbol on your front cover where you would like it to be.
Go over that with another layer of the modge podge and tissue just be sure to press around the triple Moon symbols so they stick out.
If you do want more texture then take your Modge Podge put another layer of glue down and then another layer of tissue, go over again with Modge Podge let dry. Just don’t forget to press the paper down around your triple moon symbols.
Flip book and repeat the mod podge tissue on the backside, you can also do the spine of the book when you do the back or when you do the front it doesn’t matter.
Let it dry completely now take your black paint and with the paint brush paint over the whole front of the book.
Let it dry and then paint the back of the book you can also open up the covers and paint that little section of Modge podging you did on the inside just make sure to let everything dry completely before moving on to the next step.
Now that everything’s dry you want to take a dry paintbrush and using the dry brush technique take a color of your choice go over the front of the book let dry, do the spine and the back. I used a different color for the dry brushing on the back of my book.
If you find you went to heavy with the dry brush color just dip your finger in your black paint and just go over some areas where you think the other color is too heavy.
Now you can leave that as is or you can take another color and lightly go over the triple moon symbol, once all that is completely dry and I would give it a few hours, paint on a layer of Modge Podge if you want a glossy look. If not just skip the Mod Podge.
The inside of you front cover is going to be looking a little bit messy so you can take a sheet of paper. It can have a design on it or it could be blank and cut it to the size of the inner book cover and glue it on. I used a road map of North Carolina.
Now your book is done.
I have been on a book making kick here recently, I guess you could say not only making books but taking old books and giving them a new life. One of the books I’ve recently finished is a hidden compartment book. I got this book when I was a preteen and lost it several years later. When my dad passed away last year I found it in one of his many boxes of books, it just seemed like the perfect book to convert to a hidden compartment book.
So about 20 pages into the book I decided that’s where I’m going to start cutting the book for the hidden compartment. The hole size was determined by my deck of Tarot cards.
I drew the size out on the page where the hole would begin. Using a exacto knife with a fresh blade cut as deep as the blade will allowed. Cut out that section, then another section and so on. This is a slow process but keep cutting out pages till you get to the depth you want.
I put a piece of chipboard on first whole page underneath the hole. Glued it down to the whole page then glued the last cut page to the top part of chipboard.
Hold the section that has the cut out, with glue and a paintbrush apply glue to the edges as you hold all the holed pages together.
Apply the glue to all three edges. Let it dry. Now all that’s left to do is hide your treasure in the book.
I did do some designs on the book cover but that is optional.
Bibbity Bobbity Boo, a Wand How-to
So my evil spawn aka the daughter has a birthday coming up. She’s married, has children, works and has a house to maintain. I could get her something practical that could help lighten the load but where’s the fun in that. I making her two fun gifts. A Wand and a Witches Grimore.
Today I made the wand. My oak tree looses limbs during every storm. I pulled off a good size stick from one of the fallen to become the magical instrument. The wand I made was super long, normally wand size is determined by the length from your elbow to wrist.
I used sanding fabric to smooth out most of the lumps and remove the rougher bark.
You can leave the wand natural but I chose to paint it using a metallic craft paint. I just dipped my finger in the paint and rubbed it all over the stick. I didn’t have a paint brush.
Once the paint dried I used a little tack glue along with jewelry wrapping wire to attach a selenite wand to the handle end. This will help with getting a good grip during those magic duels.
I wrapped a piece of amber further up the wand where the wand had some rough bumps. I used a thick grey thread to attach an amethyst point not far from the amber.
I also used the thread and tack glue to attach another piece of amber for the wand tip. I took a knife and cut a small notch around just below the wand tip to give the thread something to grab onto.
I had several charms I added to the tip also. I just tied them on below the amber.
Last I got out my trusty side kick, the wood burning tool. I burnt into different areas on the wand rune symbols. Research whatever symbols you use. You don’t want to accidentally summon a demon. That would be rude, imagine you’re demon going about your business doing demony things when blam! You’re in a bedroom of some crafter who is wearing pajamas, hair not brushed.
When summoning a demon one should dress up! If you don’t take it seriously how do you expect the demon to?
You can draw the symbols on the wand then burn them into the wood or live life dangerously like me and just free hand burn the symbols.
Hardback sketchbook (Michaels)
2 small journals (Dollar Tree)
Craft Paint: 1 metallic copper (Michaels)
1 grape (Michaels)
1 metallic glorious gold (Michaels)
Plastic spiders (Dollar tree)
Mod podge (Michaels)
Wood burning tool
Scrap tissue paper. I used the kind you put in gift bags.
Scrapbook paper (assorted designs) (Michaels)
Assorted jewelry charms/pendants (Michaels and Hobby Lobby)
Spray bottle of water.
Eye of Newt (optional)
Dead man’s toe (again optional)
How-to or Make Magic!
Using water bottle spray corners of paper. Fan/flip through paper till dry. Open book to random pages, lightly spritz entire page. Dont soak the paper. Let dry. Do this to several pages. You will not need to do this to the smaller books.
Ball up the tissue paper to get some wrinkling going. Set aside. Glue a spider on front of each book. Once that sets up put a layer of mod podge down on first book. Unball the paper and apply to book. You should have some tissue over hang. You want wrinkles, lots of them. Cover spider also, push paper down between the legs so you can keep some of the spider shape. Brush a layer of mod podge over the paper. Let dry. Now open front of book, mod podge the inner edges and press down the tissue. Apply another coat of mod podge over that. Take something and prop under the book cover to let the inner part dry. I did second layer of tissue on the bigger book. The smaller books did fine with just one layer.
Now as you do the spine on the bigger book here’s where you will put the chain (I used several inches of an old necklace). Put down a line of glue halfway down spine. Press chain into glue. Now tissue paper/Glue the spine. Let dry. The smaller books I added the chain to the book back. Now paper/glue the back cover of books.
Paint on a solid coat of the metallic copper. Let dry. Next a layer of grape. Go over some parts heavier than others. Let dry. Dry brush lightly with gold. Let dry. Sounds simple, it is but the drying time is what is the most bothersome. I don’t like the wait, but did I use the time to decide on ‘spells’ and print out items to go inside books. Curses and hexes are optional. *if you find you went to heavy on the gold in some areas just put some grape paint on your finger and rub over the gold. It might take more than one layer.*
Heat up your wood burning tool. Burn edges of paper. This will take a long time. Don’t give up it is worth it. If you burn yourself feel free to drop the F bomb. I did, a few times. Glue on a pendant to the book cover.
Now you are ready to fill up your book with spells, recipes, whatever floats your boat. I mean you can have a casserole recipe on one page and the next page a nice demon summoning. That will give you something to do to pass the time while the casserole bakes. If you’re single: make casserole, summon demon. BAM date night with a demon.
I made this book for the daughter. She grew up watching Buffy, Charmed, Supernatural, and Hocus Pocus. So I made up some pages using those shows as inspiration. I left most of book blank so she can add her own spells.
I bought a huge Halloweeb skull years ago at Kmart. It was hollow on the inside and lit up. The skull has been hanging out in my yard for years. Yes, I keep skulls and skeletons out in my yard year round.
The light in the skull quit working year two. I have been wanting to turn it into a container for plants for a few years now. Finally I got around to doing it.
Saturday I asked my husband what I would need to remove the top of the skull. I planned on removing it myself, honestly. Husband said draw what you want removed. I did and he proceeded to do the cutting. I sat back and supervised. Now if you notice in one of the photos below my drawn circle looks jabberwocky. It’s intentional. Okay it wasn’t I have no clue what the hell happened. Turned out okay in the end.
Once my skull had been opened I put some rocks and yard junk into bottom. When filling any container garden I add a layer of rock to bottom. Then plastic bottles or junk, just to fill space. A container full of only dirt is HEAVY. This helps lighten the load. I added some dirt up to where the eye sockets began.
I tucked some Vince Periwinkle through holes then added more dirt. I added some colorful annuals to the top. Done.
As mother of the pirate bride I of course needed to dress like a pirate for the wedding. Easy, I thought. Black skirt, black top and a head bandana.
Wrong. I looked like I was going to a funeral. My outfit needed something to break up the black. So I threw on a white shaw. Wrong again. I looked like a little old lady going to mass
I had to rethink the whole pirate outfit. After some thought I decided on dressing as a gypsy pirate. That opened up a whole new world of options.
I went with a different black shirt. Made and bought a ton of tacky jewelry. Got a wig, made some pirate beads for wig. Ta-da!
Still wasn’t right. Gypsies are colorful and bright. I was going to ditch the white shaw. As I went to hang it in closet things clicked. I had so many beads left from the hair and beard beads projects. The shaw had all those long tassels hanging.
I added beads. It looked beautiful. I tried it on and everything tangled. Tangled badly. So I trimmed and redid all the bead work. I didn’t want to loose the flowing tassels. So I left the ones on ends long. To add more color I used some cross stitch thread and added onto tassels.
I tried on my outfit. It still needed more color. I bought a multi color pack of juggling scarves from amazon.
I attached those to a strand of lace trim that I could tie around waist.
I bought a belt from the rennasaince festival and added a variety of items to it. Gemstones, pouches, a fan, copper mug and a small anchor.
Halloween will soon be upon us. Ghouls, zombies and witches will be bringing the fear to my neighborhood. That is if I get everything done in time.
A few of my projects this year are complete. Many others are in the works. Two of the ones complete are simple yet are great props to include in a porch display.
A simple rustic witch broom and a tall spooky witch hat. Witch shoes are in the works but they are not cooperating with me at this time.
Today I will share with you how to make the broom.
The broom was quick and easy. I have an oak tree, I call him The Might Oak. Yes I do talk to my tree, he’s a nice guy. Sadly during every storm he loses a few limbs. Some small and others big enough to use as a weapon in a zombie apocalypse.
I began this project by gathering a sturdy limb big enough to serve has the broom handle. After finding the perfect one I began to gather up smaller limbs. Some sturdy others thin and flimsy.
Before going any further I took some twine. It was a light beige. Not liking the new clean twine look I decided to age some. Which is a simple process. Get some tea bags throw them and the twine in a pot of water, bring to a boil. Take off burner and let sit awhile. Easy as pumpkin pie.
While the tea is working its magic grab some duct tape. It’s time to make a broom!
Take one of the small limbs, place it toward the bottom of the broom handle. take the duct tape and use it to attach the smaller limb.
Keep wrapping the tape around the handle adding more limbs as you go. Stop when you are satisfied with the look of your broom.
Then I took the twine out of the pot of tea water. You can let the twine dry to use wet. I find it works better and you get a tighter wrap with it wet. Knot it at the top of the taped area. Now just start wrapping until you reach the end of the duct taped area. Tie off.
Done. Now wait for a full moon then take your broom for a spin!